• Image 1

Premium Door Kegerator Conversion Kit


Product Description

Kegerator Conversion Kit Product Highlights: 
Our best door conversion kit! Premium drip tray with stainless steel backsplash, dual gauge regulator, and cleaning kit. 

Kegerator Conversion Kit Features:
Enjoy fresh, cold draft beer at home by converting an existing refrigerator into a Kegerator.

Gas Cylinder Aluminum 5 lb. (shipped empty)
Regulator Dual Gauge CO2
Keg Coupler D System for North American Beers
Drip Tray Stainless Steel 6" x 6" x 11" high backsplash with 1 hole, with removeable grid for easy cleaning
Cleaning Kit 1 Qt Cleaning Bottle with faucet attachment, faucet wrench, brush, 4 oz line cleaner
Included Chrome faucet, Faucet knob, Shank, Door spacer, Hoses with fittings, Instructions

Kegerator Conversion Kit Includes:
  • Brand new aluminum 5 lb. CO2 cylinder (legally shipped empty). Aluminum cylinders are lightweight, durable, do not rust, and are easy to handle. Aluminum cylinders are also superior in quality compared to most steel cylinders found on the market.
  • Dual gauge Co2 regulator that features a solid forged brass body, wire mesh inlet filter, quad-ring inlet seal, built in pressure relief valve, 0-60 and 0-3000 PSI gauges, and a 3/8" O.D. outlet barb with shutoff.
  • 4’ of red Thermoplastic super vinyl gas hose with re-useable snap clamps.
  • American Sankey "D" system keg coupler that features a stainless steel, a stainless steel handle fork, a tin-nickel alloy plated probe, a short lever handle, a built in pressure relief valve, and check valves for both the gas-in and liquid-out ports.
  • 5’ long super vinyl beer hose assembly. This brewery approved hose will not rot, swell, or dry out and is unaffected by normal beer line cleaning chemicals. Pre-assembled with hex nut and neoprene washer on one end for connecting to keg coupler.
  • 4" long PVC door spacer that allows secure shank installation without crushing the refrigerator door insulation.
  • 5-1/8" long nipple shank assembly. The one-piece construction prevents leaks, and the barbed fitting allows easy connection of the beer line assembly. Includes shank, forged brass locknut, plastic flange, coupling nut, sleeve, and snap ring.
  • Premium quality chrome plated solid brass beer faucet. Features a chrome plated forged brass body, a Teflon lever washer for smooth consistent performance and easy operation, a solid brass faucet lever, and a chrome plated bonnet, shaft, and collar.
  • High gloss black plastic faucet knob.
  • Faucet wrench for easy tightening the faucet to the shank.
  • Premium shank mounted 6" x 6" stainless steel drip tray with 11" tall backsplash and a 1 3/4" x 3/4" N.P.T. drain pipe, Drain nipple, 6' of vinyl drain hose, and a 1 quart plastic drain bottle with lid.
  • Cleaning kit that includes a 1 Quart shatter proof plastic cleaning bottle with a Low profile hand pump and a Solid brass faucet cleaning attachment, 1 pound tub of Clean-Flo powder cleaner, and Faucet cleaning brush.
  • Complete, detailed easy to follow instructions for quick installation.



Do I need to keep the CO2 tank inside the refrigerator?

CO2 (or mixed) gas cylinders do not have to be kept in the refrigerator. Gas cylinders are often located outside of the refrigerator to allow maximum use of the refrigerator interior space. All that is needed is a small hole in the side or back of the refrigerator for the gas hose to go from the regulator to the keg coupler. 

The distance between the cylinder and the keg is not important and does not affect performance.

Most kegerators and refrigerator conversion kits come with a 4’-5’ length of 5/16" I.D. vinyl gas hose as most installations place the gas cylinder in the refrigerator with the beer keg. If you wish to locate your gas cylinder farther away, simply purchase a longer length of 5/16" I.D. vinyl gas hose.

But for safety reasons, keep in mind cylinders must always be kept upright, away from sources of heat, and be secured with a chain or strap to prevent it from falling over. 

Should the gas cylinder be exposed to a source of heat, the gas inside the cylinder will expand resulting in over pressurizing the cylinder. This may cause the pressure relief valve (PRV) on the cylinder to burst, resulting in an incredibly loud boom. The cylinder will be OK, but the thin copper burst disk in the pressure relief valve (PRV) assembly will need to be replaced.

Find Similar Products by Tag

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

10.00 LBS
$15.00 (Fixed shipping cost)